14 of 15
888-45-305-W-00 rev. G • 06/19
ADJUSTMENT
Increase Lift Strength
If the mounted weight is too heavy or this product does not stay
up when raised, then you'll need to increase Lift Strength:
Decrease Lift Strength
If the mounted weight is too light or this product does not stay
down when lowered, then you'll need to decrease Lift Strength:
Important! You will need to adjust your Glide LD after installation is complete.
Make sure all your equipment is properly installed on the product before
attempting adjustments. This product should move smoothly and easily through
the full range of motion and stay where you set it. If movements are too easy
or diffi cult or if product does not stay in desired positions, follow the adjustment
instructions to create smooth and easy movements. Depending on your product
and the adjustment, it may take many turns to notice a difference. Any time
equipment is added or removed from this product, resulting in a change in
the weight of the mounted load, you should repeat these adjustment steps to
ensure safe and optimum operation.
a
Adjust lift up and down.
10mm
To Next Page
Loading...
