6 of 15
888-45-305-W-00 rev. G • 06/19
abc
d
e
10mm
WARNING:
Anchors that are not fully set in solid concrete will not support the applied
load resulting in an unstable, unsafe condition which could lead to personal
injury and/or property damage. Consult a construction professional if you
have any doubt about what this means in regard to your particular situation.
1
2
3
WARNING:
Mounting holes must be at least 3-1/8”
(80mm) deep and must be located within
solid concrete, not mortar or covering ma-
terial. If you drill into an area of concrete
that is not solid, reposition mounting holes
until both anchors can be fully inserted
into solid concrete!
3/8”
3/8”
9.5-10mm
3-1/8”
80mm
M6 x 70mm
2x
2x
NOTE: make sure extension bracket is level
before tightening bolts. Refer to Step 3 on the
next page!
M8 anchor
2
Mount extension bracket
Option B: solid concrete walls
To Next Page
Loading...
