3 of 4
888-97-348-G-00 rev. B • 08/19
2
1
3
1x
2.5mm
1x
2.5mm
1x
a
ab c
bc
With the pole and base securely mounted to the desk
surface, remove any arms mounted to the pole.
a. Loosen the collar, lower to desired height for lower arm.
b. Tighten the two set screws in the collar to secure.
c. Attach lower arm.
a. Attach the provided collar.
b. Tighten the two set screws in the collar to secure at least 3" (76mm) from the top of the pole.
c. Attach top arm.
To Next Page
Loading...
