Ergotron Neo-Flex Laptop Cart User Manual

888-24-125-W-02 rev.J • 03/13
1 of 9
ASSEMBLY INSTRUCTIONS
Instrucciones de instalación
Notice d’assemblage
Montageanleitungen
Installatie instructies
Manuali d’Istruzione
取扱い説明書
安装说明
설치 안내
Neo-Flex Laptop Cart
Important!
You will need to adjust this product after installation is complete. Make sure all your equipment is properly installed on the
product before attempting adjustments. This product should move smoothly and easily through the full range of motion and
stay where you set it. If movements are too easy or di cult or if product does not stay in desired positions, follow the adjustment
instructions to create smooth and easy movements. Depending on your product and the adjustment, it may take many turns to
notice a di erence. Any time equipment is added or removed from this product, resulting in a change in the weight of the mounted
load, you should repeat these adjustment steps to ensure safe and optimum operation.
20"
(508mm)
3-15 lbs
(1.36-6.8 kg)
12.5"-18"
(318-460 mm)

Ergotron Neo-Flex Laptop Cart Specifications

General

Display diagonal	17 \
Product color	Gray
Maximum weight capacity	6.8 kg
Harmonized System (HS) code	94038900
Quantity per shipping (inner) case	1 pc(s)
Type	Multimedia cart/trolley
Material	Aluminium, Plastic, Steel, Zinc
Lock type	Padlock
HP segment	Business, Enterprise
Number of wheels	4 wheel(s)
Security bracket	Yes
Recommended usage	Laptop
Maximum screen size	17.3 \
Minimum screen size	12 \
Height adjustment type	Manual
Number of displays supported	1
Built-in charger	No
Package width	380 mm
Package height	1150 mm
Package weight	22952 g
Warranty period	3 year(s)

Weight and Dimensions

Depth	580 mm
Width	450 mm
Height	1213 mm
Weight	23600 g
Height adjustment	508 mm
Dimensions (WxDxH)	552 x 380 x 1150 mm

Summary

Neo-Flex Laptop Cart Assembly

Parts and Hardware Identification

Lists and identifies all components and hardware needed for assembly.

Base and Column Assembly Steps

Steps 1-2: Assemble the cart's base and vertical column components.

Laptop Tray Attachment Step

Step 3: Attach the laptop tray and its mounting bracket to the column.

Security Features Installation Steps

Steps 4-5: Install security screws and the 5-sided security wrench.

Power Strip and Cable Management Steps

Steps 6-7: Mount power strip and manage cables along the column.

Final Securing Steps

Steps 8-9: Secure the laptop and complete the main assembly process.

Initial Setup and Adjustment Guidance

Pre-Adjustment Equipment Check

Ensure all equipment is properly installed before attempting adjustments.

Tension Adjustment Procedure

Detailed instructions for adjusting tension for smooth and stable movement.

Operational Adjustments and Safety

Lift Strength Adjustment Guide

Instructions for increasing or decreasing lift strength based on load.

Critical Safety Warnings

Essential warnings regarding moving parts, impact hazards, and weight limits.