To Next PageTo Next Page
Need help?Do you have a question about the Ergotron 200 Series and is the answer not in the manual?
General| Product Series | 200 Series |
|---|---|
| Category | Racks & Stands |
| Color | Black |
| Tilt | +70° / -5° |
| Pan | 180° |
| Lift | 13" |
| Adjustability | Tilt, Pan, Height |
| Mounting Type | Desk mount |
Critical advice on ensuring wall structure supports four times the equipment weight to prevent instability and injury.
Inspect mounting solution regularly for loose fasteners; apply thread-locking adhesive if needed to prevent loosening.
Use 10-24 x 5/8" screws for pole clamp attachment; do NOT use 10-24 x 1/2" screws.
Guidelines for mounting on concrete (min. 4" depth) and wood (min. 2 studs) for secure installation.
Ensure mounting holes are 3-1/8" deep and set in solid concrete, not mortar, for stability.
Ensure bracket is level, flush, and snug to the wall surface. Do not overtighten the bolts.
Instructions for attaching the monitor using 75x75mm or 100x100mm VESA patterns.
Adjust product tension based on mounted equipment weight for smooth, safe operation. Repeat if load changes.
Follow instructions to tighten or loosen tension for smooth, easy forward/backward tilt adjustment.
Follow instructions to tighten or loosen tension for smooth, easy side-to-side pan adjustment.
Follow instructions to tighten or loosen tension for smooth, easy portrait/landscape rotation.
