Ergotron Neo Flex Cantilever UHD - Step 5: Mount Arm and Secure

PN:888-61-050-W-01 RevC
13
STEP 5
NOTE: For safe and proper installation be sure to install the 4 locking screws as shown.
7
1
2
Center Posititon
Left Posititon
Right Posititon
Contents
Part # Qty Description
1 1 Wall Plate
2 1 Arm Assembly
3 1 Cable Management
4 1 Monitor Plate
5 2 Tilt Tension Handle
6 4 Spider 46 Adapters
7 4 Lateral Adjustment Screws
Screws / Hardware for Flat Panel
Part # Qty Description
M-A 4 Philips screws M4 x 15mm
M-B 4 Philips screws M4 x 30mm
M-C 4 Philips screws M5 x 15mm
M-D 4 Philips screws M5 x 30mm
M-E 4 Philips screws M6 x 15mm
M-F 4 Philips screws M6 x 30mm
M-G 4 Philips screws M8 x 15mm
M-H 4 Philips screws M8 x 30mm
M-I 4 Round Spacers: M6-M8 x 5mm
M-J 4 Round Spacers: M6-M8 x 10mm
M-K 4 Round Washers: M4-M5
M-L 4 Round Washers: M6-M8
Part # Qty Description
W-A 4 Lag Bolts (8mm x 65mm)
W-B 4 Steel Washer
W-C 4 Wall Anchor (10mm OD x 8mm ID)
Part # Qty Description
P-A 8 Carriage Bolt
P-B 8 Nylock Nut
P-C 8 Washer
P-D 2 Phillips Screw M4x6mm
P-E 2 M4 Washer
P-F 1 Closed Wrench
P-G 1 Allen Wrench
Wall Kit
Specialty Hardware
P-F