Ergotron STYLEVIEW Series User Manual

777-24-029-G-00 rev.A • 07/12
1
5
6
2
3
4
1
5
2
3
4
12˚
20"
(508 mm)
EN
STYLEVIEW®
QUICK REFERENCE
ERGONOMICS
RANGE OF MOTION
Working customize - to your size
1 Set top of monitor screen about one inch below eye level - Release brake
and lift or lower riser as needed.
2 Tilt screen for comfortable viewing and to reduce eye and neck strain.
3 Pull keyboard tray forward and position mouse tray and mouse pouch on
right or left, as needed.
4 Work with elbows bent at about 90° to minimize muscle strain.
5 If the riser moves up and down with di culty, or if it drifts out of set
position, consult the product
manual for adjustment
information.
6 Stay in charge!
Powered carts should be
plugged into outlet as often as
possible to keep battery charged
and computer running.
Moving stow - before you go
1 During normal movement, release brake and lower worksurface to
lowest position for optimal stability and unobstructed view.
2 Tuck away open trays and return mouse, scanner and other
accessories to their places.
3 Unlock both front casters.
4 Push cart from rear with elbows bent at about 90° to maximize
control and minimize muscle strain.
5 Don’t run out!
Before moving, make
sure cord is unplugged
from outlet and hooked
to basket for safe travel.
Remember, charge
battery fully 100%
every day!
Release Brake to move riser.

Ergotron STYLEVIEW Series Specifications

General

Warranty	5 years
Monitor Size	Up to 24 inches
Tilt	30°
Material	Aluminum, steel
Cable Management	Yes

Summary

Ergonomic Setup and Usage

Monitor Positioning

Set monitor screen top below eye level and adjust riser height for optimal viewing and posture.

Screen Tilt Adjustment

Tilt the screen to achieve comfortable viewing and reduce eye and neck strain.

Keyboard and Mouse Tray Setup

Position keyboard tray forward and mouse tray/pouch for ergonomic comfort.

Optimal Work Posture

Maintain elbows bent at approximately 90 degrees to minimize muscle strain during work.

Riser Adjustment and Maintenance

Consult manual for riser adjustment if movement is difficult or drifts from set position.

Battery Charging for Powered Carts

Keep powered carts plugged in to maintain battery charge and ensure continuous operation.

Moving and Stowing the Cart

Lowering Work Surface for Transport

Release brake and lower worksurface to its lowest position for stability and unobstructed view.

Securing Accessories

Tuck away open trays and return mouse, scanner, and other accessories to their places.

Caster Lock Engagement

Unlock both front casters before pushing the cart for easier maneuverability.

Proper Pushing Technique

Push cart from the rear with elbows bent at 90° to maximize control and minimize strain.

Pre-Movement Safety Checks

Ensure cord is unplugged and secured, and battery is fully charged before moving the cart.

Keyboard Light Functionality

Drawer Security Operations

Unlocking Drawers

Learn the three methods for unlocking drawers: Master PIN, User PIN, or key.

Locking Drawers

Wait 4 seconds for the drawer lock to engage automatically after it is fully closed.