Ergotron WorkFit-P - Product Components and Tools; Components; Tools Needed

Set-up Steps
1
DESK THICKNESS
~
,.6r. Warning: Bec~use mounting surface materials can
vary widely, it is imperative that you make sure mounting surface
is strong enough to handle. mounted product and equipment.
CLAMP
GROMMET
DESK THICKNESS
0.78"-2.56" (20-65mm)
0.78"-1.78" (20-4Smm}
1.70"-2.56" {43-65mm)
ct==
fe .4mm
Smm~
0 ij________-11) f /4"
r
b
C 1x8
1x --·--~
d 1x~1x~
&
• •• · CAUTION: Bolt must be
centered In hole.
0.5"-2.5"