888-33-332-W-02 rev.G • 11/15
3 of 12
1
2
4
12
11
ENGLISH
GREEN ARROWS MARK IMPORTANT ADJUSTMENT POINTS
After installation, adjust product to properly handle added weight.
To view a video on this adjustment procedure, go to
install.ergotron.com
Important! You will need to adjust this product after installation is complete. Make sure all your equipment
is properly installed on the product before attempting adjustments. This product should move smoothly
and easily through the full range of motion and stay where you set it. If movements are too easy or
diffi cult or if product does not stay in desired positions, follow the adjustment instructions to create
smooth and easy movements. Depending on your product and the adjustment, it may take many turns to
notice a difference. Any time equipment is added or removed from this product, resulting in a change in
the weight of the mounted load, you should repeat these adjustment steps to ensure safe and optimum
operation.
Follow Steps 1 - 8 for Installation
To Next Page
Loading...
Need help?
General
