Erickson 07708 - Page 3

Item no: 07708
12 spring washer 2x
M12 nut 2x
12-U bolt 4x
M12*75 hexagon
bolt 2x
5. Adjust the height based on the height of your truck rack bed, xe the position and tighten with M12*75
Hexagon Bolt (9), 12 U Bolts (4), 12 Spring Washers (6) and M12 Nuts (5). Repeat it to secure the other
post.
4. Once you are satised with the placement and mounting, use two self tapping screws (supplied) to secure to
the base of the bed.