11 / 20
Before Operating the E100
Charge the Battery
Charge the battery pack when it is correctly connected in the machine. Make sure the
battery pack is charged monthly.
Thoroughly Check the E100
Ø Check the brushes and squeegee for wear and tear.
Ø Check the battery level. During operation, the battery indicator on the control
panel shows the amount of power left. lt is not recommended to use the
battery when charged below 40%.
Ø Fill the cleaning solution tank.
o Remove the stopper.
o Pour in a maximum of 18gal/4L of cleaning fluid.
o Replace the stopper and make sure it seals tight.
o Put the E100 in park position.
o Put the tank on the E100 with the valve first.
o Press the tank downward to break the valve seal.
o Push the tank into place until you hear a "click."
o Clean your hands.
USER MANUAL
To Next Page