ERIClean E100 - Troubleshooting

20 / 20
3. Remove all loose components like brushes, tanks, and squeegee.
4. Dispose all items according to your local laws and regulations.
Troubleshooting
Problem
Cause
Solution
No power
No battery pack
Install battery pack
Empty battery pack
Charge battery pack
Battery pack incorrectly connected
Reconnect battery pack
Insufficient/No water flow
Wrong button on
Check the button on the control
panel
Main On/Off button is “off”
Check the main On/Off button
Empty tank
Fill the tank
Tank incorrectly placed
The tank valve must be clicked
on the nipple to open the seal.
Reseat the tank.
Filter blocked
Ensure there are no dirt particles
in the solution tank and that the
filter is clean
Blocked water pipe
Request professional service
Poor water recovery
Squeegee opening blocked
Remove the water pipe and
clean the squeegee opening
Tea rs i n s q uee ge e b la d es
Replace squeegee blades
Filter blocked
Check the foam filter and clean
it, if necessary
Vacuum hose blocked
Check and remove blockage
Vacuum motor not running
Request professional service
Leakage
Tan ks i n cor rec tly pl ac ed
Check and reattach fluid tanks
Tea r in va c uum h ose
Replace vacuum hose or
request professional service
Battery not charging
Battery is at end of life
Replace battery
USER MANUAL