19 / 20
Replace the Vacuum Hose
1. Detach the squeegee as described in above sections.
2. Remove the solution tank. You can see where the vacuum hose is connected at
the E100 handle.
3. Hold the scrub deck firmly with one hand.
4. Detach the vacuum hose by twisting the connector one quarter turn
counterclockwise.
5. Carefully pull the vacuum hose from the top of the machine.
6. Guide the new vacuum hose via the opening to the hose connector located on
the E100 handle.
7. Connect the top to the hose connector by twisting the clockwise one quarter turn
until they have lined up.
8. Reinstall the squeegee.
Recommended Additional Cleaning
Clean the exterior of the E100 weekly with a non-abrasive, non-solvent cleaner or a
clean, damp cloth. To clean the scrub deck, remove the brushes first.
Decommissioning and Disposal
It is the responsibility of the E100 owner to dispose of the product responsibly. After
decommissioning, the E100 still contains valuable resources and needs to be disposed
of according to your local laws and regulations regarding recycling of electrical
equipment.
Before disposal please:
1. Flush the machine properly.
2. Remove the battery pack for separate disposal.
USER MANUAL
To Next Page
Loading...