Ericsson 2219 - Assemble DC Power Connector


55..44 AAsssseemmbblle e DDC C PPoowweer r CCoonnnneeccttoor r 
This section provides information on how to assemble the This section provides information on how to assemble the DC powerDC power
connector for 2-wire connections.connector for 2-wire connections.
StepsSteps
To assemble the DC power connector:To assemble the DC power connector:
1.1.
Ge6817D
Ge6817D
OO
NN
OO
FF
FF
Ensure that the external power isEnsure that the external power is
switched off before switched off before connectingconnecting
the cable.the cable.
2.2.
Ge6426B
Ge6426B
Ge6243CGe6243C
AABB
B = 0 VB = 0 V
A = –A = –48 V48 V
Assemble the DAssemble the DC powerC power
connector according to theconnector according to the
instructions delivered with the DCinstructions delivered with the DC
power connector. Make sure thatpower connector. Make sure that
the cable shield is properlythe cable shield is properly
connected in the DC powerconnected in the DC power
connector.connector.
Note:Note:
The wires of the power cable canThe wires of the power cable can
have different colors. Make surehave different colors. Make sure
that the wires are connected tothat the wires are connected to
the correct polarities.the correct polarities.
Install Radio
Install Radio
1414
67/67/15153131-L-LZA ZA 70701 61 600001/1/1 1 UeUen n JJ || 20201717-0-06-6-0606