How to fix microphonics in Ericsson Two-Way Radio?
When servicing your Ericsson Two-Way Radio, ensure that there is no solder buildup on the chassis or shield. Replace all removed hardware exactly as it was. Make sure that all mounting screws are properly tightened and shields are in place. Loose or rubbing parts, particularly in the VCO area, can cause microphonics, so verify that all hardware is correctly installed and tightened.
What to do if my Ericsson Two-Way Radio has microphonics?
If your Ericsson Two-Way Radio experiences microphonics due to shock and vibration, ensure that there's no solder build-up on the chassis or shield during servicing. Replace all removed hardware exactly as it was. Make sure all mounting screws are properly torqued and shields are in place. Loose or rubbing parts, especially in the VCO area, are sensitive and can cause microphonics. Reinstall and properly torque all hardware.
General| Manufacturer | Ericsson |
|---|---|
| Product Name | ORION |
| Category | Radio |
| Dimensions | Varies by model |
| Weight | Varies by model |
Instructions for unpacking and verifying all components of the Orion Mobile Radio kit.
Guidelines and considerations for routing cables during radio installation.
Detailed instructions for installing the power cable for the Orion Mobile Radio.
Information and diagrams for connecting the accessory cable.
Instructions for enabling and connecting the ignition sense feature for the radio.
Steps for physically mounting the radio and completing its connections.
Steps for pre-installation programming of front mount dual control units.
Steps for pre-installation programming of remote mount dual control units.
Detailed installation steps for front mount dual control units.
Procedure for pre-installation programming of all radio units in dual radio configurations.
Steps for installing dual radio units in a front/remote mount configuration.
Steps for installing dual radio units in a remote/remote mount configuration.
To Next Page
