StepsSteps
1.1.
Ge9969A
Ge9969A
20 Nm20 Nm
16 mm16 mm
Assemble the pAssemble the pole clamp on thole clamp on thee
pole, and tighten the washerspole, and tighten the washers
and nuts.and nuts.
2.2.
Ge9970A
Ge9970A
Attach and tighteAttach and tighten the doublen the double
nuts.nuts.
66..33 HHooiisst t RRaaddiioo
The handle is designed to hold the weight of maximum one radio.The handle is designed to hold the weight of maximum one radio.
Note:Note:
Do not hoist more than one radio in the same handle; the handleDo not hoist more than one radio in the same handle; the handle
might break.might break.
StepsSteps
To hoist the radio:To hoist the radio:
1.1. AttacAttach a lifth a lifting deing device to tvice to the top ohe top of the pof the pole or wle or wall, wall, where there the radhe radio is toio is to
be attached.be attached.
Install Radio
Install Radio
1616
67/67/15153131-L-LZA ZA 70701 61 600001/1/1 1 UeUen n JJ || 20201717-0-06-6-0606