Ericsson AIR Series - Secure the AAT to mount; Attaching AAT to Mount and Structure

3) Clip the supplied AIR mount retaining strap to one ear of the mount, then route
the strap behind the antenna and beneath the upper antenna mounting bracket,
then clip the loose end of the strap to the opposite ear on the mount.
4) Adjust strap tension so that the mount sits securely on the antenna and all
bumpers are in contact with the antenna.
Secure the AAT to mount
1) Secure AAT to mount by positioning upper lip of mounting rail on back of AAT into
mount grip, then rotate AAT into to security latch. User should feel AAT “click” into
position. Tighten both mount thumbscrews.