Ericsson AIR Series User Manual

Ericsson AIR Antenna Series Mount Instructions
Sunsight AAT models AAT30 & AAT15
Ericsson AIR 11, AIR 21, AIR 32
The following instructions assume the user has read and understands the AAT30,
AAT15 Quick Start Guide and AAT30, AAT15 User’s Manual . Both documents are
available for download at https://www.sunsight.com/index.php/support.
What’s included
1. AIR 11/21/32 mount with grip assembly
2. AIR mount securing strap
Secure the mount to the AIR antenna
1) Position the mount so that the vertical (AIR 11, AIR 21) or horizontal (AIR 32)
slot slides over the antenna lifting bracket.
2) Ensure front bumpers (x4) make contact with the face of the antenna and top
bumpers (x2) are in contact with the top of the antenna.

Ericsson AIR Series Specifications

General

Brand	Ericsson
Model	AIR Series
Category	Antenna
Language	English

Summary

Secure the mount to the AIR antenna

Mounting the Antenna Bracket

Steps for securing the mount to the AIR antenna, including strap and bumper placement.

Secure the AAT to mount

Attaching AAT to Mount and Structure

Securing the AAT to the mount and then to the structure using a lanyard.

Power on and connect to the AAT

AAT Power On and Wi-Fi Connection

Powering on the AAT and connecting to its Wi-Fi hotspot for different device types.

Logging into the AAT Interface

Accessing the AAT via shortcut or web browser after connection.

Configure AAT Measure Settings

Setting the orientation to 'Faces Front' on the AAT Measure Only page.