What to do if I hear a warning tone and the signal strength indicator is not shown on my Ericsson Cordless Telephone?
If you hear a warning tone and the signal strength indicator isn't displayed on your Ericsson Cordless Telephone, it means the handset is out of range. Move the handset closer to the base station.
Why I cannot switch on the handset of my Ericsson Cordless Telephone?
If you can't switch on your Ericsson Cordless Telephone handset by pressing NO, it's likely the battery is low. Place the handset in the base station to charge the battery.
What does it mean if I hear a warning tone and the battery icon is flashing on my Ericsson Cordless Telephone?
If you hear a warning tone and the battery icon is flashing on your Ericsson Cordless Telephone, it means the battery is low. Place the handset in the base station to charge it.
Why the green charging light does not come on when I place the handset of my Ericsson Cordless Telephone in the base station?
If the green charging light doesn't illuminate when you place your Ericsson Cordless Telephone handset in the base station, it could be because the battery is completely flat. Leave the handset in the base station to charge.
Why do I keep hearing the dial tone after dialing a number on my Ericsson Cordless Telephone?
If you still hear the dial tone after dialing a number on your Ericsson Cordless Telephone, you might need to change the dialing method of the base station.
What to do if my Ericsson Cordless Telephone dials a number as soon as I press a button?
If your Ericsson Cordless Telephone handset dials a number as soon as you press a button, check the telephone line cable.
Why I cannot use the phone book on my Ericsson Cordless Telephone?
If you cannot use the phone book on your Ericsson Cordless Telephone, it is probably empty. Add names and numbers to the phone book to use it.
What to do if I cannot hear anything through the base station loudspeaker of my Ericsson Cordless Telephone?
If you cannot hear anything through the base station loudspeaker of your Ericsson Cordless Telephone, ensure the volume is set to an audible level.
Why some menu options are in another language on the display of my Ericsson Cordless Telephone?
If some menu options on your Ericsson Cordless Telephone are in a different language, it's because English is the default language if the handset language isn't available.
General| Brand | Ericsson |
|---|---|
| Model | BS260 |
| Category | Cordless Telephone |
| Language | English |
Guide on how to use the manual, highlighting sections like "Quick start" and "Getting started".
Information about the publisher, warranty, and potential changes to the guide.
Lists key features of the cordless phone, such as answering machine and phone book.
Diagram labeling parts of the handset.
Diagram labeling parts of the base station.
Explains icons and indicators found on the handset display.
Explains indicators on the base station.
Instructions to get the cordless phone up and running quickly.
Lists the items included in the product packaging.
Step-by-step guide for the initial setup and installation of the phone.
Instructions for installing the battery and initial charging.
Guidance on base station placement and connecting telephone line/power.
Details on handset battery charging, usage, and the IPEI code.
Procedures for switching the handset on/off and attaching the clip.
A quick overview of making and receiving calls, and using the base station.
Guide to making your initial call to test the phone.
Explains display information, icons, and menu navigation.
Instructions for setting the time and date on the base station and handset.
Procedures for making external calls via dialling or pre-dialling.
How to make calls efficiently by using the phone book.
Steps for finding and calling contacts from the phone book by name.
How to redial the last number or select from the last ten dialled numbers.
How to return calls from the 'who called' list.
Steps for answering and ending incoming calls.
How to mute the microphone and ringer temporarily or permanently.
How to page a handset using the base station.
Special hints for operating the phone with multiple handsets.
Procedures for making internal calls and handling incoming calls.
Handling incoming calls while already engaged in a conversation.
Procedures for consulting with a third party or transferring calls.
Steps to initiate a conference call with three participants.
How to switch handset dialling between tone and long tones.
How to insert pauses in dialled numbers for specific network requirements.
Introduction to the phone book's capacity and access methods.
Guide on using number keys to input names and numbers for contacts.
How to add numbers from the redial list to the phone book.
How to add numbers from the 'who called' list to the phone book.
Procedures for correcting or changing existing phone book entries.
How to remove individual entries or all entries from the phone book.
Introduction to the base station's digital answering machine and its capabilities.
Diagram illustrating touch tone controls for the answering machine.
Methods to access and control the answering machine (buttons, handset, remote).
How to control the answering machine using the handset menus.
Procedures for controlling the answering machine from an external phone line.
How to listen to newly recorded messages via the base station or handset.
Methods for deleting recorded messages via base station, handset, or calling in.
Instructions for turning the answering machine on and off via base station, handset, or calling in.
How to record personal messages (memos) and custom announcements.
How to choose which announcement callers will hear.
How to check the remaining recording time available on the answering machine.
Instructions on changing the menu language on the handset.
How to adjust the earpiece volume during a call or when not on a call.
How to adjust ringer volume and select different call sounds or melodies.
Setting discreet ringing and automatic answering with audio accessories.
How to enable or disable the audible click sound when pressing keys.
How to set display illumination and adjust contrast for readability.
How to reset all handset settings to their default values.
Steps to change the base station's PIN code for security.
Guide to changing the default language for base station menus.
Instructions for setting the time and date on the base station and handset.
How to adjust the ringer volume for incoming calls via handset or base station.
How to set the order in which handsets ring for incoming calls.
How to enable or disable notifications for incoming calls during an active call.
How to designate a handset as priority for call diversion.
How to set up automatic call routing based on prefixes for cost savings.
How to adjust the length of the dial tone pause inserted before dialling.
How to reset all base station settings to their default values.
How to set the number of rings before the answering machine picks up.
How to use ring differentiation to potentially save on call costs.
How to use the base station loudspeaker for monitoring or playing messages.
How to adjust the loudspeaker volume for answering machine or handsfree use.
How to set the maximum recording duration for each message.
How to enable/disable time stamp messages for recorded messages.
How to select the language for the voice guide used with the answering machine.
How to temporarily or automatically lock handset keys to prevent accidental presses.
How to protect the handset with a PIN code against unauthorized use.
How to enable PIN protection for the handset upon power-on.
How to enable PIN protection for managing base station subscriptions.
Steps to change the handset's personal PIN code.
How to unlock a blocked handset using the IPEI code.
Steps to change the base station's PIN code.
How to reset the base station PIN code if it becomes blocked.
How to display the handset's unique IPEI code.
A summary table of security codes like PIN, IPEI, and PARI.
How to make an emergency call using the handset, even when locked.
Instructions for using the handset as a baby monitor.
How to set up a feature where pressing any key dials a specific number.
How to use the base station's built-in handsfree speakerphone for calls.
How to use the handset and base station as an intercom system.
How to prevent certain numbers from being dialled from a handset.
How to set the call tariff for displaying call costs based on metering pulses.
How to set call budgets (time or cost) for individual handsets.
How to check for voice mail messages automatically.
How to configure voice mail notification settings.
How to extend coverage by using multiple base stations.
How to set the base station's operating mode (single-cell or multi-cell).
Using the phone with a switchboard, including call transferring.
How to switch between pulse and tone dialling methods.
How to set signalling methods like earth signalling and hook flash.
Procedures for transferring calls using the R key or NewCall option.
How to connect and subscribe handsets to base stations for extended coverage.
How to set automatic or manual base station connection.
Detailed steps for subscribing a handset to a base station.
How to assign a personal name to a subscribed base station.
How to remove a handset's subscription from a base station.
How to view the current date and time on the handset display.
Methods for placing calls on hold and starting three-party calls.
How to page handsets and call the base station handsfree.
How to call the answering machine and insert pauses in numbers.
How to edit entries and mute the handset ringer temporarily or permanently.
Important safety guidelines for using the cordless phone and its components.
Answers to frequently asked questions for resolving common phone issues.
Solutions for common problems like no ring signal, battery issues, or connection errors.
A list explaining the function of each button on the handset and base station.
Explains the meaning of icons and terms displayed on the handset.
Describes audible and visual signals from the handset and base station.
An overview of the top-level menu items for navigating handset functions.
Instructions for cleaning and servicing the cordless phone.
Detailed technical specifications of the cordless phone, including DECT/GAP.
List of available spare parts and accessories for the product.
Information regarding the product's warranty terms and conditions.
Quick reference for common telephoning operations like making calls and redialing.
Quick reference for memory functions like redialing and returning calls.
Quick reference for adjusting volume and muting ring/alarm.
Quick reference for navigating handset menus and confirming/cancelling options.
To Next Page
