IndexIndex
second_tag <VLAN-ID>/transparent/untagged - Second VLAN
ID for packets forwarded on this egress connection. Range for VLAN ID is
1 to 4095.e
tags <list-of-VLAN-IDs>/untagged/* - LAN ID’s that are
forwarded on this ingress connection. The list of VLAN IDs is a Range
from 1 to 4095. * will forward all VLAN IDs. Different options may be
combined by comma (,). Range may be given as ID,ID,ID (three vlan IDs)
or ID-ID (all VLAN IDs between the first and last VLAN IDs). If double
tagged frames are used (second_tags is configured), only single VLAN
IDs, * or untagged may be used (not range).
second_tags <VLAN-ID>/untagged - Second VLAN ID’s that are
forwarded on this ingress connection. Range for each VLAN ID is 1 to
4095.
filter_profile <profile> - The filter profile to be used.
ip_destinations – IP destination can be used as a traffic mapping
mechanism, in order to identify a service by its IP destination, for
example, a multicast group address, or a BRAS address. This way it is
possible to send End-user traffic of different types to different switching
domains even though they have the same VLAN tag or are not tagged at
all.
The following limitations are in effect with respect to the range of IP
addresses:
The first IP-Address must be less than the second IP-Address
The IP-Addresses must form a valid network that can be expressed with the /nn
notation
233.0.0.0-
233.0.0.7
OK because this is a valid network (233.0.0.0/29).
233.0.0.0-
233.0.0.8
Not OK since this is not a valid network (end
address is illegal).
233.0.0.1-
233.0.0.7
Not OK since this is not a valid network. Start
address is invalid in combination with this end
address.
Default Settings
bandwidth_limitation: none
broadcast_allowed: yes
description: undefined
p-tag: 0
To Next Page
Loading...