Glossary
Example:
efn# get cpu
Key Value
........................ .................
method static
mac_address 00:13:5E:78:c5:99
ip_address 10.66.16.13
net_mask 255.255.255.128
default_gateway 10.66.16.1
restart_dhcp success
>>>>>>>>>>> ipsec_status disabled <<<<<<<<<<<<<<<<<<<
automatic_configuration no
broadcast_address
dns_primary_nameserver
dns_search_domain
dns_secondary_nameserver
syslog_server
uptime 99 days
users
13.8.14 set ethernet_port
Use this command to configure parameters for the Ethernet port.
Syntax
set ethernet_port <port> [auto_negotiation {no|yes}]
[crossover {auto|no|yes}]
[description] [duplex {full|half}]
To Next Page
Loading...