Glossary
proxy_ip_address <IP-address> - Defines the IP address that is
used by the multicast proxy both upwards and downwards. The default
(which is also set by the unset command) is 0.0.0.0.
igmp_immediate_leave no/yes – Activates or deactivates the
immediate leave function. Immediate leave can only be activated when the
proxy is used.
igmp_query_interval <interval> – Defines the time interval
between two queries. Also used to calculate the membership time interval.
The range is 1 to 255 seconds.
igmp_query_response_interval <interval> – Defines the time
interval that the EFN expects a response after a query. Also used to
calculate the membership time interval. The range is 1 to 15 seconds.
option_82 no|circuit_id_eda|circuit_id_tr101|
remote_id_eda|remote_id_tr101|configurable|
vlan_port_mac –
See section 8.5 on page 70 for details on DHCP option 82 header
formats.
no - DHCP option 82 is not used.
circuit_id_eda – the EDA format used in the Circuit ID field of DHCP option 82.
circuit_id_tr101 – the TR101 format is used in the Circuit ID field of DHCP
option 82.
remote_id_eda – the EDA format is used in the Remote ID field of DHCP option
82.
remote_id_tr101 – the TR101 format is used in the Remote ID field of DHCP
option 82.
configurable – option 82 with the Circuit ID and Remote ID Suboptions defined
is used (see set connection in section 13.8.9 on page 120)
vlan_port_mac – option 82 with information about the VLAN Tag, port number
and EFN324 MAC address is used.
vlan_port_sysname – option 82 with information about the VLAN Tag, port
number and EFN324 SNMP SYS_NAME is used.
real_mac_dhcp_option <0, 128..254> - The option “0” means that
the real MAC option is not enabled. If it is configured to any value from 128
To Next Page
Loading...