IndexIndex
to 254 then the real MAC would be inserted in DHCP packet with that
specific option.
switching_rule broadcast/ip_validation/normal/pppoe/
virtual_mac - Define the type of switching. For example, normal
switching according to bridging table or for forced forwarding, and so on.
transit_link ethernet_port <port>/none - Ethernet_port to
which underlying, daisy chained, EFN is connected. Range 1 to 26.
uplink ethernet_port <port>/none – Destination port for forced
forwarding. Range 1 to 26.
Default Settings
description: undefined
check_gateway_timer: 60
check_gateway_source_address: yes
gateway: undefined
uplink: undefined
transit_link: undefined
ip_address: auto
mac_address: auto
arp_and_dhcp_tag: undefined
mac_address_learning: yes
max_dynamic_ip_addresses: 65535
max_virtual_mac_addresses: 255
multicast: yes
multicast proxy IP address: 0.0.0.0
igmp_immediate_leave: no
igmp_query_interval: 125 seconds
igmp_query_response_interval: 10 seconds
option_82: no
real_mac_dhcp_option: 0
switching_rule: normal
Command Usage
Together with ethernet_port and host_port the vlan command defines
connection and switching rules in the switch.
When switching_rule = normal and uplink is undefined, no forced
forwarding mechanisms are activated. Forced forwarding may be activated in
three levels:
Level 1: uplink and gateway are set. Packets are now forced up to the gateway.
To Next Page
Loading...