Glossary
Example:
efn# release remove R2A
efn# release transfer_configuration CXP_901_0022_P4C04
efn# release start P4C04
efn# release make_permanent
efn# release load sftp://test:test123@192.168.106.72/
CXP_901_0022_R954.tar.gz
efn# release load ftps://test:test123@192.168.106.72/
CXP_901_0022_R954.tar.gz
13.9.11 save
Use this command to save the current configuration parameters as a
configuration file.
Syntax
config save <file>
Arguments:
<file> - Insert the file name to save the present configuration under.
Default Setting
None.
Command Usage
The command is used to save the current configuration as a configuration file.
A saved configuration file can be restored whenever appropriate.
The saved configuration file can be displayed using the command list, see
section 13.9.4 on page 151.
Example:
efn# config save test1
To Next Page
Loading...