Glossary
Command Description Page
due to – oversized (>1530 bytes), undersized
(<64 bytes), alignment or FCS errors.
GE ports: Total frames received and discarded
due to – oversized (>1530 bytes), undersized
(<64 bytes) and CRC errors.
out_octets - Total bytes transmitted.
out_pkts - Total Unicast, Multicast, Broadcast frames
sent.
out_errors - FE ports: Number of outgoing frames discarded
due to FCS error, Oversized or Undersized
error.
GE ports: Number of outgoing frames
discarded due to FCS error, frames sequence
error or jam bit error (collisions).
mac_undersize - Number of received and discarded frames
with undersize error (<64 bytes).
mac_oversize - Number of received and discarded frames
with oversize error (>1530 bytes).
phy_in_error - Number of received and discarded frames
due to errors in symbol, or delimiter (both
relate to errors in the physical transmission).
Note: The statistic counters are 32-bit values (0-4294967295).
When a counter value reaches its maximum (4294967295), the
counter resets and starts counting from 0 (zero).
vlan
Display information about the switching domain configuration.
borrowed_ip_address - The currently used own IP address.
borrowed_mac_address - The currently used own MAC
address.
gateway_ip - The currently used gateway IP address.
incoming_port - Number of incoming ports.
outgoing_ports - Number of outgoing ports.
multicast – Multicast addresses active (only for multicast set to
igmp_snooping or igmp_proxy).
141
To Next Page
Loading...