Need help?Do you have a question about the Ericsson RX8200 and is the answer not in the manual?
Points to note for making signal connections to the receiver.
Instructions for powering on the receiver safely.
Steps to configure various input types for the receiver.
Steps to select a decode service from the input feed.
Points to observe when configuring the Video Output.
Points to observe when configuring the Audio Outputs.
Points to observe when configuring for Single-service Decryption.
Points to observe when configuring for Multi-service Decryption.
Accessing customization, CA, input, output, download, SNMP, presets, and help pages.
Points to note for making signal connections to the receiver.
Instructions for powering on the receiver safely.
Steps to configure various input types for the receiver.
Steps to select a decode service from the input feed.
Points to observe when configuring the Video Output.
Points to observe when configuring the Audio Outputs.
Points to observe when configuring for Single-service Decryption.
Points to observe when configuring for Multi-service Decryption.
Accessing customization, CA, input, output, download, SNMP, presets, and help pages.
General| Model | RX8200 |
|---|---|
| Manufacturer | Ericsson |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Video Decoding | MPEG-2, MPEG-4 |
| Audio Decoding | MPEG-1 Layer II, AAC, Dolby Digital |
| Demodulation | QPSK, 8PSK |
| Frequency Range | 950 MHz to 2150 MHz |
| Input Impedance | 75 Ohm |
To Next Page
