To Next PageTo Next Page
Need help?Do you have a question about the Erie water treatment IQSoft IQ-CS and is the answer not in the manual?
General| Brand | Erie water treatment |
|---|---|
| Model | IQSoft IQ-CS |
| Category | Water Dispenser |
| Language | English |
Instructions for preparing the brine cabinet before installation.
Guidance on connecting the drain hoses and ensuring proper drainage.
Details on connecting water supply and output hoses, including bypass options.
Steps for connecting the appliance using the included factory bypass system.
Instructions for installing a separate 3-valve bypass system for isolation.
Procedure for connecting the appliance to the power supply.
Steps to introduce water and pressurize the system after installation.
Instructions for adding salt to the brine cabinet.
Guidance on programming the electronic controller for initial setup.
How to adjust the water softener's residual hardness setting.
Initiating the regeneration cycle manually.
Explanation of the display and operation in service mode.
Behavior during power up, power failures, and time setting.
Information on what to do if a timer failure occurs.
Alerts and actions for routine maintenance.
Details on the display during regeneration cycles.
How to verify the correct functioning of the water meter.
Procedures for initiating immediate or delayed regeneration.
How the salt level alarm works and how to reset it.
Instructions for activating and deactivating holiday mode.
Guide to setting language, time, hardness units, and buzzer.
Advice on regular servicing by a competent technician.
User-performed checks for proper appliance functioning.
Steps for placing the appliance in bypass or maintenance mode.
Information on salt level, bridging, and refilling the brine cabinet.
Cleaning instructions to maintain the appliance's external appearance.
Using resin cleaner to maintain softening capacity.
Procedure for sanitizing the appliance, especially after power disconnection.
