What to do if Eriez Power Tool has a blown fuse or circuit breaker?
If the fuse or circuit breaker is blown in your Eriez Power Tool, the first step is to check for any short circuits within the system. Once identified, correct the short circuits to prevent recurrence.
Why is my Eriez Power Tool showing an incorrect voltage?
To address incorrect voltage in your Eriez Power Tool, verify the voltage specifications on the nameplate and compare it with the line voltage. Ensure they match to avoid any issues.
What to do if there is foreign material in my Eriez Power Tool?
If foreign material is affecting the performance of your Eriez Power Tool, carefully examine the equipment and remove any foreign substances that may be present.
What to do if spring clamp or tray mounting bolts are loose on Eriez Power Tool?
If you notice loose spring clamps or tray mounting bolts on your Eriez Power Tool, make sure to tighten all bolts to the correct torque specification. This should resolve the issue.
What to do if Eriez Power Tool is in contact with other equipment?
If your Eriez Power Tool is making contact with other equipment, check the setup and correct the positioning to eliminate the contact. This prevents vibration and damage.
What to do if Eriez Power Tool causes sympathetic vibration?
If you're experiencing sympathetic vibration in other equipment due to your Eriez Power Tool, check the setup and correct it to minimize the vibration.
What to do if there is a poor or broken weld on the Eriez Power Tool tray?
If you find a poor or broken weld on the tray of your Eriez Power Tool, inspect the weld and correct it to ensure the tray is stable and secure.
How to fix incorrect tuning on Eriez Power Tool?
To correct incorrect tuning on your Eriez Power Tool, refer to the maintenance instructions. Decrease displacement and output by using fewer or thinner tuning springs. To decrease displacement and eliminate striking, use more or thicker tuning springs.
How to fix spring failure on Eriez Power Tool?
If you suspect a spring failure in your Eriez Power Tool, refer to the maintenance instructions for disassembly and examination. White areas on tuning springs indicate failure. Order new parts from the factory and replace them according to the instructions.
How to fix coil failure on Eriez Power Tool?
If the coil fails in your Eriez Power Tool, replace the coil or the coil and E-frame assembly. Order the necessary parts from Eriez parts lists and carefully follow the maintenance instructions during replacement.
General| Brand | Eriez |
|---|---|
| Model | HD-46C |
| Category | Power Tool |
| Language | English |
To Next Page