!
Introduction
!
Dear Customer,
!
Thank you for choosing Ermator as your supplier.
!
We hope that the Ermator S26 dust extractor will be to your satisfaction and meet your expectations.
!
Ermator has been manufacturing professional dust extractors since 1967 and has over the years
acquired a genuine technical knowledge in this area. We are continuously striving to improve our
products in our product segment and will continue to supply the market with new equipment.
!
!
!
!
Notice!
!
These instructions are only for dust extractor type Ermator S26.
!
The Ermator S26 dust extractor can only be used with dry, non-explosive material.
!
The Ermator S26 dust extractor has been designed to clean construction areas and be connected
to small electrical machines such as drills etc.
!
Ermator will not be held responsible if the dust extractor is used for other applications or been
used in ways other than those outlined in this instruction manual.
!
Please pay particular attention to the safety regulations.
!
Read the complete instruction manual before using the Ermator S26.
!
All spare parts used with the Ermator S26 must be those specified by Ermator.
!
!
To Next Page
Loading...