1. UNPACKING
!
When unpacking the machine, please check that the following accessories are included:
•
The hose with end fittings.
•
Handle.
•
Floor nozzle.
!
If any of the above-mentioned parts are missing, please contact your local distributor or our sales
representative.
Assemble the front wheels using the using bolt, washer and nut that are included in the package.
!
2. SAFETY INSTRUCTIONS
!
Handling
!
Warning
•
Cables damaged through crushing or splitting can be dangerous if used and should be
replaced immediately. Risk of personal injury.
!
Warning
•
Do not connect the machine to an unearthed socket. Risk of personal injury.
!
Warning
•
Make sure the assembly area is firm, so the dust extractor does not tip over. Risk of personal
and material injury.
•
Warning
•
Risk of pinching when handling the toggle fastener.
!
Warning
•
The machine must not be used in environments where explosive gases may be present. Serious
risk of explosion.
!
Service
!
Warning
•
Remove the plug from the wall socket when carrying out maintenance work. Risk of personal
injury.
!
Warning
•
Dust can be spread when the coarse filter and the absolute filter are replaced that can be
hazardous to health. Accordingly, the user should wear protective glasses, protective gloves,
and a breathing mask conforming to protection class FFP3.
!
Warning
•
Do not puncture the absolute filter. Risk of dust dispersion.
!
!
!
!
3. FUNCTION
!
The machine is designed for sucking and separating dry, non-combustible dust with an explosion
limit value of >0.1mg/m
3
.
The motor is started by the switch.
The switch has three positions: 0: Motor off
To Next Page
Loading...