Problem Cause Procedure
Motor does not start No power Connect the machine
Cable defective Change
Switch defective Change
!
Motor stops immediately Wrong fuse Connect to correct fuse
after starting
!
Motor runs but there is no Hose not connected Connect hose
suction Hose blocked Clean hose
No Longopac bag Fit Longopac bag
!
Motor runs but suction Hole in the hose Change hose
Poor Filter blocked Change filter
Top cover loose Adjust
Sealing defective Change current seal
!
Dust blows from motor Filter loose or defective Adjust or change
Abnormal noise Order service
!
"
To Next Page
Loading...