Need help?Do you have a question about the EROSTEK ET312 and is the answer not in the manual?
General| Brand | EROSTEK |
|---|---|
| Model | ET312 |
| Category | Portable Generator |
| Language | English |
Electrostimulation can cause serious harm if misused; consult a physician before use.
ErosTek is not liable for damage or harm resulting from product misuse.
Contraindications include pacemakers, pregnancy, and individuals under 18.
Device is for healthy, consenting adults. Discontinue use if soreness or irritation occurs.
Use only with designed accessories; do not connect channels together or modify the unit.
Connect external equipment to correct jacks to avoid damaging sensitive devices.
Avoid using ET312 with high-voltage violet wand devices to prevent damage.
Connect AC adapter, set levels to min, ensure unit is OFF before connecting accessories.
Press the power switch to turn the ET312 ON.
Use Up/Down keys to select desired mode shown on the LCD display.
Use Level and MultiAdjust controls to produce desired stimulation intensity.
Read safety info; electrostimulation has risks. Not for those with heart conditions.
Perform stimulation below the waist; avoid heart, neck, or head areas.
Use only approved accessories; avoid jewelry, toxic metals, or small electrodes.
Experiment on yourself before using on others; avoid splitting channels for multiple users.
Never connect audio devices or computers to output jacks to avoid equipment damage.
ET312 offers multiple e-stim modes; tailor each mode to personal preference.
Connect, set levels to min, turn ON, choose mode, increase levels gradually.
Press to turn ON/OFF; avoid letting battery die to prevent permanent damage.
Adjust output intensity for each channel (00-99); intensity shown on LCD.
Fine-tunes parameters for desired effect or added variety in most modes.
Constantly adjusts parameters for interplay between channels; MA adjusts speed.
Unique "push/pull" effect; MA adjusts stroke rate.
Increases frequency in three blocks at different rates; MA adjusts speed.
Combines effects; level/frequency change subtly; MA controls on/off rate.
Continuous stimulation on A, gated on B; MA adjusts pulse frequency.
Toggles outputs on/off at varying rates, grouped into blocks that grow stronger.
Connect audio source to Audio or Mic input; adjust MA and Level controls.
Optimized for Mic input, picks up sounds for synchronized e-stim.
Stereo version for Audio input, processes left/right signals independently.
For computer wave files, speech; preserves phase info, use below waist.
Allows running different modes on each channel; factory default is Stroke/Waves.
Randomly selects from first 6 modes with random length/value; MA has no effect.
Mixes random effects at various intervals; MA has no effect.
Alternates output between channels; MA adjusts the rate.
Starts with synchronized ramp, builds urgency, resets; MA adjusts pulse frequency.
Refer to Section A2 for increasing power level beyond factory defaults.
ET312 self-checks on power-up; displays errors for issues like Link, Calibration, Power.
Low battery message indicates charging need; check AC adapter for power errors.
Optimize LCD contrast using a small screwdriver, especially in extreme temperatures.
Blinking LEDs on power-up may indicate incomplete upgrade or key press; reload software.
Hold UP/DOWN keys during power-up to reset to factory settings. Check audio connections.
Customers use ET312 at their own risk; ErosTek not liable for harm from misuse.
Connected lead wires must be less than 3 meters (118") long for CE compliance.
To Next Page