Why is my ERRECOM Ultrasonic Jewelry Cleaner pulsating?
- RRobert EricksonAug 8, 2025
If your ERRECOM Ultrasonic Jewelry Cleaner is pulsating, there might be several reasons. First, the water filter could be blocked, so you should clean it. Second, the nozzle might be partially blocked; clean it to remove any contamination and debris. Third, there might be air in the inlet hose; allow the machine to run with the trigger open until regular working pressure resumes. Fourth, ensure that the water supply meets the required specifications. Finally, ensure there is enough water in the tank, because the hose might be twisted.
