5.1 ENTER DATA IN SET MODE
SETUP / DISPLAY DESCRIPTION Range Code Default
E3 BROKEN BAG
D11 ELECTROVALVE 003
Alarm for broken bag check ev 3 D11
E4 EMISSION TC
D12c OVER THRESHOLD
Continuous emission of dust above the set threshold D12c
E5 PROBE SIGNAL
D12c TRIBO < 2mA
TRIBO CHECK probe signal below 2 mA D12c
E6 COMPR. AIR
LACK D5a OPEN
Cycle stop since no consent from compressed air pressure switch D5a
E7 MAXIMUM
dP ALARM
Maximum dP alarm active. dP reading over SET 15 (See section 5.1) C7d
E8 MINIMUM
dP ALARM
Minimum dP alarm active dP reading under SET 12. (See section 5.1) C7c
8.1 INFORMATION AND GUIDE ON THE DISPLAY
To Next Page
Loading...