2.3 OPTION ON REQUEST
The presence of options on request could nullify or modify the operating of standard features.
Code Description
D11 Emission control by TRIBO-CHECK probe. Alarms on relay K2.
By connecting the Tribo-Check probe to the device it is possible to keep under control the dust emission in the duct.
The TC probe management contain some function and possible alarm situations that allow to find if there is a broken
bag or a continuos emission over a set threshold.
If there is an alarm situation the relay K2 indicate it and on the display it is possible to check the kind of alarm. For
further information read the manual of the device
To Next Page
Loading...