ESA VT300W - User Manual

Hardware Manual
405.1200.037.2 - Rel.: 2.21 of 25/02/2008

Summary

General Information on Electromagnetic Compatibility (EMC)

Laying Cables for EMC

Disturbance Suppression Circuits

Details specifications for RC and DIODE disturbance suppression filter circuits.

Power Supply and Connections

Connections to Avoid

Illustrates connections that must not be made to prevent VT damage.

Recommended Connection Scheme

Provides a wiring scheme to avoid damaging the VT.

Video Terminal VT50 Details

Preparation for Data Transfer

Details steps for preparing the VT for data reception.

Video Terminal VT525 H Operation

Touch Screen Calibration Procedure

Details the procedure for calibrating the touch screen.

MAC Address Introduction

Inserting Customized Labels

Warnings for Label Insertion

Lists critical points to observe before inserting customized labels.

Mounting the Terminal within the Container

Mounting with Nuts

Communication Ports Overview

General Notes on Serial Communication

Modem Settings and Commands

AT Commands for Modem Setup

Lists AT commands for setting the modem and their effects.

Connection Cables

General Notes on Cable Selection

Connecting the Cable Shield

Details the correct procedure for connecting cable shields.

Network Connection Types

Profibus-DP Network

Ethernet Network Connection

Terminal Operation with Keyboard

Changing Variable Field Values

ISA-1 A Alarms Handling

Explains how ISA alarms are displayed and acknowledged.

Terminal Operation with Touch Screen

Calibration of Touch Screen

Details the procedure for calibrating the touch screen.

Data Exchange Areas

Command Area Overview

ESA VT300W Specifications

General

Storage	64 GB SSD
Operating System	Windows 10 IoT Enterprise
Ports USB 2.0	2
Processor	Intel Celeron J1900 Quad-Core
RAM	4 GB DDR3L
Enclosure	Aluminum
Protection class	IP65
Operating Temperature	0°C to 50°C
Display Size	15.6 inches