ESAB A20 - CERTIFICATION AND CONTROL LABELS; Compliance Marks and Notified Bodies

8
CERTIFICATION & CONTROL LABELS
The A20 & A30 welding filters are tested for eye protection by the following notified body: ECS
GmbH - European Certification Service Augenschutz und Persönliche Schutzausrüstung
Laserschutz und Optische Messtechnik
Test lab accredited by DAkkS D-PL-19590-02-00
Notified by the Central
Authority of the Federal States
for Safety Technologies (ZLS)
ZLS-NB-0156
We are therefore allowed to use the following marks:
European Conformity mark.
This confirms that the
product fulfils the
requirements of the Directive
89/686/ EWG
EN379, EN175B,
EN166 B
ESAB AB
Lindholmsallén 9
Box 8004
402 77 Gothenburg
Sweden