What to do if Esatto ECD7 Dryer does not start?
If your Esatto Dryer isn't starting, make sure the start button has been selected, the door is completely closed, and the desired programme has been properly set.
Why Esatto ECD7 Dryer working state LED is not on?
If the working state LED is not on, check that the mains plug is correctly inserted and the programme is properly selected. You should also check the fuse in the house.
How to fix Esatto Dryer when 'Full' LED is on?
If the “Full” LED is permanently on, it indicates that the container is full and needs to be emptied. If emptying the container doesn't resolve the issue, please contact your local service center.
Why Esatto ECD7 drying time is too long?
If your Esatto Dryer isn't reaching the desired dryness level or the drying time is too long, try these steps: 1. Clean the lint filter and wash the condenser. 2. Empty the container. 3. Check the water outlet. 4. Ensure the dryer installation isn't too restricted. 5. Clean the moisture sensors. 6. Use the next higher drying programme or the Timer programme.
How to reduce humidity from Esatto ECD7?
If the humidity in the room increases significantly when you are using your Esatto Dryer, ensure the room is adequately ventilated, clean the cool grille, and make sure that the air condenser has been inserted correctly.
What to do if Esatto ECD7 Dryer is leaking water?
If water is running out of your Esatto Dryer, make sure to align the dryer horizontally and clear the air condenser and door seals.
Why Esatto ECD7 door opens by itself?
If the Esatto Dryer door opens by itself, press the door until it clicks into position and check whether the clothes load is not too heavy.
To Next Page
General
