CUTLERY BASKET
→ Cutlery should be placed in the cutlery basket separately from each other in the
appropriate positions, and do make sure the utensils do not nest together.
STARTING A WASH CYCLE
→ Load the cutlery and dish basket racks.
→ Add your detergent and rinse aid if required.
→ With the dishwasher door open, press the Power Button and the Power Indicator light will
turn on.
→ Select your desired wash program from the options: Intensive, Heavy, Normal, Rapid or
Soak.
→ Once your desired wash program is selected, the cycle will begin with 10 seconds.
Note: A cycle that is underway can only be modied if it has only been running
for a short time. Press the start/reset button for 3 seconds and the
machine will enter standby mode. You can now select your new desired
wash program.
AT THE COMPLETION OF A WASH CYCLE
→ Once the dishwasher cycle has nished, the dishwasher willl make an audible tone for 8
seconds, before stopping.
→ Turn o the dishwasher using the Power Button.
→ Open the dishwasher door and wait a few minutes before unloading the
dishwasher. This will allow the dishes to climatise and return to a cool
state for handling and assist with your dishes drying.
To Next Page
Loading...
