70*31*14
Pentium-80-OPTO 80A 100A N/A
N/A
2-6 5-18 Available N/A 58g 70*31*13
100A
Pentium-100 100A 120A N/A N/A 2-6 5-18 Available N/A 120g 78*55*15
Size
Li-ion
Li-poly
NiMH
NiCd
L*W*H
18A Guard-18 18A 22A
Linear
5V/2A 2-4 5-12 Available Available 24g
45*26*11
25A Guard-25 25A 35A Linear 5V/2A 2-4 5-12 Available Available 27g 45*26*12
30A Guard-30 30A 40A
Linear
5V/2A 2-4 5-12 Available Available 29g 45*26*12
40A Guard-40 40A 55A Switch 5V/3A 2-6 5-18 Available Available 40g 55*28*15
60A Guard-60 60A 80A Switch 5V/3A 2-6 5-18 Available Available 65g 70*31*14
80A Guard-80
80A 100A
Switch 5V/3A 2-6 5-18 Available Available 67g 70*31*14
Pentium Series
Guard Series
WeightBurst
Current
(>10s)
BEC
Mode
BEC
Output
Battery Cell User
Programm-
able
Balance
Dis charg e
Protection
60A
Class Model Cont.
Current
80A
12A
40A
BEC
Mode
(
Note1
)
BEC
Output
Class Model Cont.
Current
Burst
Current
(>10s)
25A
30A
Balance
Dis charg e
Protection
WeightBattery Cell User
Programm-
able
Thanks for purchasing our
Electronic Speed Controller (ESC). High power system for RC model can be very dangerous, so we
strongly suggest you read this manual carefully. In that we have no control over the correct use, installation, application, or
maintenance of our products, no liability shall be assumed nor accepted for any damages, losses or costs resulting from the use
of the product. Any claims arising from the operating, failure or malfunctioning etc. will be denied. We assume no liability for
personal injury, property damage or consequential damages resulting from our product or our workmanship. As far as is legally
permitted, the obligation to compensation is limited to the invoice amount of the affected product.
Features:
Balance Discharge Monitoring and Protection (BDMP) Design for lithium battery pack.
This innovative new system provides
real time monitoring of the discharge voltage of each cell in your lithium (Li-ion/Li-poly) battery packs. Since each cell is monitored
and protected by the ESC, you can expect an even longer service life from your battery packs as you fly with increased confidence.
(Remark: This function is ONLY available for the “Guard” series ESC)
Compatible with Lithium and Nickel battery types. (Lithium-Ion / Lithium-Polymer or Nickel Metal Hydride / Nickel Cadmium)
Extreme low output resistance, super current endurance.
Multiple protection features: Low-voltage cut-off protection / over-heat protection / throttle signal loss protection.
3 start modes: Normal / Soft / Super-Soft, compatible with fixed-wing aircraft and helicopter.
Throttle range can be configured to be compatible with all transmitters currently available on market.
Smooth, linear and precise throttle response.
Separate
voltage regulator IC for microprocessor (except Pentium-6A and Pentium-10A), providing good anti-jamming capability.
Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
Our pocket-sized
Program Card
can be purchased separately for extremely easily programming the ESC at the field.
With a program card, you can activate the music playing function of the ESC, and totally there are 15 songs can be selected.
Specifications:
Note1: BEC means the “Battery Elimination Circuit”. It is a DC-DC voltage regulator to supplies the receiver and other
equipments from the main battery pack. With the build-in BEC of an ESC, the receiver needn’t to be supplied with an additional
battery pack.
IMPORTANT! The ESC named “xxx-xxx-OPTO” hasn’t a built-in BEC, an UBEC (Ultimate-BEC) or an individual battery pack
should be used to power the receiver. And an individual battery pack is needed to power the program card when setting the
programmable value of such ESCs, please read the user manual of program card for reference.
5S-6S Li-Poly
4
BEC Output Capability
Standard micro servos(Max.) 5 4
2S Li-Poly 3S Li-Poly 2S - 4S Li-Poly
5
Linear Mode BEC(5V/2A)
32
4S Li-Poly 5S Li-Poly
Switch Mode BEC(5V/3A)
To Next Page
Need help?
General