©
2017 Escalade Sports
For Customer Service Call 1-888-996-2729
6
All Rights Reserved.
Assembly Instructions
SPECIAL NOTES - ASSEMBLY OF THIS FOOSBALL TABLE:
1. It will be helpful to build this table on 2 saw horses or on a work table.
It is suggested to build this table on the carton or other protective material as to not
scratch or blemish any parts .
2. We highly recommend a 2nd adult to help during the assembly process.
3. The "LED" features of this table requires the wires to be placed and routed correctly
during the assembly process to insure correct connection points in the latter assembly.
Please read the text closely and study the diagrams and notes to insure correct assembly.
4. Please handle all wires with care - do not pull on, trap wires under washers or other
parts, or damage the connectors.
Make sure to place the wires exactly where the text, notes and diagrams say to place them.
5. The male and female connectors will only connect ONE WAY.
Please study the diagrams and study the connectors before connecting.
Do not force connections.
6. When table assembly is complete - gently push in or together on all connections to
insure a good connection.
7. The "BLACK and RED" wire will appear in each of the 4 corners ( bottom , during upside
down assembly ).
These are for the leg LED's, and will connect latter in the assembly.
To Next Page
Loading...
