ASSEMBLY INSTRUCTIONS
GAME OPERATION
After your assembly is complete, make sure you have all wire connections
completely plugged in on the board and the switch. Next, plug the adapter into a
suitable 110v outlet and plug the other end into the back of the switch.
Find the ON / OFF button on the switch and turn the unit on. At this time, the
electronic scorer will fight up and begin making noise, Before you begin playing
you will want to test the sensitivity of the shock sensors on the unit. First, turn the
sensitivity knob on the back of the scoring unit to low. Next, throw a ball at the
cloth face intentionally missing one of the holes. When you hit the backboard and
miss a hole the unit should register the throw as a "down". If it does not register,
turn the adjustment knob one crick towards high and re-test. Repeat test until it
registers only one "down" when the ball hits the board. This option is available
because different players will throw the ball with different amounts of force. You
want a missed shot to count as a "down" for all players so it will need to be adjusted
for different throwing styles.
Please refer to the Game Operation Manual for rules on how to play the game.
REPLACEMENT PARTS
WIRE SET FOR SMALL HOLE
WIRE SET FOR MEDIUM HOLE
1
1
WIRE SET FOR LARGE HOLE
GAME OPERATION MANUAL
For Customer Service Call 888-996-2729
22
To Next Page
Loading...