To Next PageTo Next Page
Need help?Do you have a question about the ESCO Technologies Labculture LB2-4B2 and is the answer not in the manual?
General| Brand | ESCO Technologies |
|---|---|
| Model | Labculture LB2-4B2 |
| Category | Laboratory Equipment |
| Language | English |
Provides an overview of the biological safety cabinet's main components.
Details the components and functions of the Sentinel control system.
Outlines the available menu options for customizing BSC operation.
Explains how to customize BSC operation through various settings.
Describes the different operating modes: Normal, Quickstart, and Maintenance.
Details the process for calibrating airflow sensors for accuracy.
Covers PIN management and reset functions for administrative control.
Explains the function and settings for the airflow monitoring alarm.
Describes how to reset the blower, filter, and UV hour meters.
Details resetting the UV lamp hour meter for maintenance tracking.
Explains how to restore BSC settings to factory defaults.
Allows selection of displaying airflow based on ambient temperature.
Covers selection of external alarm or motorized window options.
Sets the duration for muting the AIRFAIL alarm.
Manages sash cycle counts and related warnings for motorized units.
Explains the operation of stopwatch and experiment timer functions.
Details common BSC alarms like SASH ALARM and AIR FAIL.
Provides access to diagnostic information for troubleshooting and maintenance.
Explains the states and operation of the sash window.
Details the push-and-hold mechanism for motorized sash window control.
Provides guidelines for safe and effective use of the sash window.
Step-by-step instructions for powering the BSC on and off.
Guidelines for safe work practices inside the biological safety cabinet.
Recommendations for comfortable and healthy working postures and practices.
Information on the function, use, and limitations of UV lamps for decontamination.
Lists suitable disinfecting agents and their effectiveness for BSC decontamination.
Outlines a recommended maintenance schedule for optimal BSC performance.
Procedures for cleaning the work surface, walls, and exterior of the BSC.
Method for testing the cabinet's audible and visual alarms.
Steps for checking mechanical and electrical functionality.
Requirement for annual re-certification by a certified engineer.
Instructions for accessing and cleaning the paper catch.
Detailed steps for cleaning the sash window of non-motorized BSCs.
Detailed steps for cleaning the sash window of motorized BSCs.
Guidance on maintaining a log of all maintenance and service activities.
