Esco ETS-LINDGREN HI-6113

Need help?

Do you have a question about the Esco ETS-LINDGREN HI-6113 and is the answer not in the manual?

Summary

Notes, Cautions, and Warnings

Note

Denotes helpful information intended to provide tips for better use of the product.

Caution

Denotes a hazard. Failure to follow instructions could result in minor personal injury and/or property damage.

Warning

Denotes a hazard. Failure to follow instructions could result in SEVERE personal injury and/or property damage.

1.0 Introduction

System Description

Describes the ETS-Lindgren HI-6113 Laser Data Interface and Field Probe Measurement System components.

Minimum Computer Requirements

Outlines the necessary computer specifications for installing and operating the HI-6113.

Summary

Notes, Cautions, and Warnings

Note

Denotes helpful information intended to provide tips for better use of the product.

Caution

Denotes a hazard. Failure to follow instructions could result in minor personal injury and/or property damage.

Warning

Denotes a hazard. Failure to follow instructions could result in SEVERE personal injury and/or property damage.

1.0 Introduction

System Description

Describes the ETS-Lindgren HI-6113 Laser Data Interface and Field Probe Measurement System components.

Minimum Computer Requirements

Outlines the necessary computer specifications for installing and operating the HI-6113.

The ETS-Lindgren HI-6113 is a Laser Data Interface and Probe Measurement System designed for use with HI-61XX Series Field Probes. It functions as an automated laser controller, accepting commands from computer software to manage the laser and retrieve data from the field probe.

Function Description:

The HI-6113 system facilitates the measurement of electromagnetic fields by providing power to and communicating with an ETS-Lindgren HI-61XX Series Field Probe. The core of its operation involves a laser that generates light power, which is transmitted via an optical fiber cable assembly to a photo-voltaic converter within the Field Probe. This converter powers the probe's circuitry. The same duplex fiber cable is used for bidirectional communication between the Field Probe and the HI-6113.

When the computer software issues a command to activate the system, the HI-6113 initiates a startup sequence, turning on the laser. Once powered up and running, the Field Probe continuously sends data to the HI-6113. The interface then returns this data to the computer software upon request, either in its raw, unprocessed form or as processed data, depending on the format requested. The USB interface serves as the primary channel for data communication between the computer software and the HI-6113.

A crucial safety feature of the Field Probe system is an interlock mechanism. This mechanism automatically turns off the laser if the HI-6113 does not receive data from the probe within a specified timeframe. This prevents potential injury from the laser if the fiber optic cables are disconnected, improperly connected, cut, or damaged while the HI-6113 attempts to turn on the laser.

The system is powered by a universal input DC power supply, which provides 5 volts DC to the HI-6113.

Important Technical Specifications:

Model: HI-6113 Laser Data Interface
Compatibility: Designed for use with ETS-Lindgren HI-61XX Series Field Probes.
Power Source: Universal input DC power supply, providing 5V DC to the HI-6113.
Communication Interface: USB for data communication with a computer.
Probe Power: Provided by a laser within the HI-6113, transmitted via fiber optic cables to a photo-voltaic converter in the Field Probe.
Data Transmission: Duplex fiber optic cable assembly for both power transmission and data communication between the HI-6113 and the Field Probe.
Safety Features: Incorporates a safety interlock mechanism that deactivates the laser if no data is received from the probe within a specified time, mitigating risks associated with disconnected or damaged fiber optic cables.

Usage Features:

System Components: The complete measurement system includes the HI-61XX Series Field Probe, the HI-6113 Laser Data Interface, a universal input DC power supply, and fiber optic cables.
Software Integration: Operates in conjunction with ProbeView™ Laser software, which needs to be downloaded and installed on a compatible computer.
Computer Requirements: Requires an Intel® Pentium® III computer with at least one USB port and a supported Microsoft® Windows® operating system. A 300 MHz processor or better is recommended for optimal performance, especially with graphics-intensive features in ProbeView Laser. Slower machines may experience reduced sample rates, which can be improved by toggling off bar and scatter graphs. An externally powered USB hub might be necessary for computers lacking a powered USB port.
Data Output: The HI-6113 can return data to the computer software in either raw or processed formats, depending on the software's request.
Indicators: The HI-6113 unit features various indicators (e.g., LASER HOT, LASER OK, RECEIVE, TRANSMIT, POWER) to provide status information.
Setup: The system involves connecting the HI-6113 to a computer via USB, connecting the power supply, and connecting the Field Probe to the HI-6113 using fiber optic cables.

Maintenance Features:

Product Information Bulletin: Users are directed to the ETS-Lindgren Product Information Bulletin for essential information including warranty details, safety and regulatory markings, procedures for receiving shipments, instructions for returning components for service, and ETS-Lindgren calibration and contact information.
Safety Guidelines: Emphasizes adherence to safety information provided in the Product Information Bulletin before connecting any components.
Hazard Warnings: The manual includes clear warnings regarding potential hazards:
- WARNING: Highlights that using controls or adjustments, or performing procedures other than those specified, may lead to hazardous radiation exposure.
- CAUTION: Denotes hazards where failure to follow instructions could result in minor personal injury and/or property damage, providing proper procedures.
- WARNING: Denotes hazards where failure to follow instructions could result in SEVERE personal injury and/or property damage, providing proper procedures.
Documentation: Refers to a separate Field Probe manual for comprehensive information on the HI-61XX Series Field Probe.
Driver Installation: Provides updated information regarding USB driver installation.
Software Updates: The revision history indicates updates to ProbeView™ Laser information and download procedures, suggesting that software updates and rebrands are part of the system's lifecycle.