The Hover-1 Axle is a personal electric scooter designed for individual transportation. This quick start guide provides essential information for safe operation, initial setup, riding techniques, charging, and calibration.

Safety and Helmet Use

Before riding the Hover-1 Axle, it is crucial to prioritize safety by wearing a properly fitted helmet. The helmet should comply with CPSC or CE safety standards, ensuring it meets recognized safety requirements. Proper helmet fitting is essential; make sure the helmet covers your forehead to provide adequate protection. Always wear your helmet when riding the scooter to minimize the risk of head injury in case of a fall or accident.

What's In The Box?

Upon unboxing, you will find the Hover-1 Axle scooter itself, a wall charger for recharging the device, and an operation manual/quick start guide. The manual contains detailed instructions and important information for the safe and effective use of your scooter.

Riding Your Axle

Riding the Hover-1 Axle requires a specific technique to ensure stability and control. To begin riding, it is important to stay relaxed. Step onto the foot mats quickly, confidently, and evenly. A helpful mental image is to imagine climbing stairs, placing one foot down, then the other. Once both feet are evenly placed on the mats, look up to maintain balance. It is normal for the Axle to vibrate or spin in one direction if weight and pressure are applied to only one foot mat. This indicates that the device is responding to uneven weight distribution, and you should adjust your stance to apply even pressure. The key to smooth riding is to apply equal weight and pressure to both foot mats.

Charging Your Axle

To ensure your Hover-1 Axle is ready for use, it needs to be properly charged. The charging process is straightforward:

Locate the charge port, which is situated at the back of the device.
Plug the wall charger into the charge port. The battery indicator lights on the device will show the charging status. A "NOT FULLY CHARGED" indicator means the battery is still charging, while a "FULLY CHARGED" indicator signifies that the battery has reached its full capacity and is ready for use. It is important to charge the device fully before its first use and whenever the battery is low to maintain optimal performance and battery life.

Calibration

Calibration is a crucial step to ensure the Hover-1 Axle operates correctly and maintains balance. If your scooter is not balancing properly or seems to be drifting, recalibration can often resolve these issues. Follow these steps to calibrate your Axle:

Place the Axle on a flat, level surface. This ensures that the device is in a neutral position during the calibration process.
Press and hold the ON/OFF button for a total of 15 seconds. This initiates the calibration sequence.
The Axle will turn on, and the battery indicator light on the board will illuminate, confirming that the device is powered on.
After the light flashes 5 times, release the ON/OFF button. This indicates that the calibration process has progressed to the next stage.
Turn the board off and then back on. This final step completes the calibration, and the Axle should now be properly calibrated and ready for use.

Maintenance Features

While the manual does not explicitly detail extensive maintenance features, the calibration process can be considered a key maintenance step for ensuring the device's operational integrity. Regular calibration helps maintain the scooter's balance and responsiveness, which are critical for safe and enjoyable riding. Keeping the device charged also contributes to its overall health and longevity.

Customer Support

For UK customers needing assistance, customer service can be reached by phone at +44 (0) 1355 241222 or via email at escooters@letmerepair.co.uk. For customers in other countries, the manual directs them to scan a provided QR code for support. It is important to retain the quick start guide, a copy of your purchase receipt, and your 23-digit serial number for your records, as this information will be necessary for any warranty claims or customer service inquiries.

In summary, the Hover-1 Axle is a personal mobility device that emphasizes user safety through helmet use, provides clear instructions for riding and charging, and offers a straightforward calibration process to maintain optimal performance. Its design focuses on ease of use and accessibility for personal transportation.

Escooter Hover-1 Axle - Page 2

Related product manuals