8
current setting temperature. If pressing “TEMP ▲”not loosely at least one second, the
setting temperature will rise rapidly. Loose the “TEMP ▲” key until up to the needed
temperature.
Reduce temperature: Click “TEMP ▼” key and then the temperature will drop １℃, and the LCD displays the
current setting temperature. If pressing “TEMP ▼” key not loosely at least one second, the
setting temperature will drop rapidly. Loose the “TEMP ▼” key until down to the needed
temperature.
5.2.2 Airflow Setting
Raise Airflow: Click “AIR ▲” key and then the airflow grade will rise 1, and the LCD displays the current
setting airflow grade. If pressing “AIR ▲”not loosely at least one second, the setting airflow
grade will rise rapidly. Loose the “AIR ▲”key until up to the needed airflow grade.
Reduce Airflow: Click “AIR ▼” key and then the airflow grade will drop 1, and the LCD displays the current
setting airflow grade. If pressing “AIR ▼”not loosely at least one second, the setting airflow
grade will drop rapidly. Loose the “AIR ▼”key until down to the needed airflow grade.
5.3 Sleep Time Setting and Resume
5.3.1 Sleep Time Setting
1. Sleep time setting of the soldering iron: click “TOOL1”key into the single displaying window of the
soldering iron. And then pressing the “INFO” key and not loosen, at the time, click “TEMP▲” or “TEMP▼”
key to change the sleeping time.
The sleeping time range of the soldering iron is from 0 to 99minutes.
2. Sleep time setting of the re-soldering gun: click “TOOL2”key into the single displaying window of
the re-soldering gun. And then pressing the “INFO” key and not loosen, at the time, click “TEMP▲” or
“TEMP▼” key to change the sleeping time.
The sleeping time range of the re-soldering gun is from 0 to 99minutes.
3. Sleep time setting of the SMD Rework Tool: click “TOOL3” key into the single displaying window of the
SMD rework tool. And then pressing the “INFO” key and not loosen, at the time, click “TEMP▲” or “TEMP
▼” key to change the sleeping time.
The sleeping time range of the SMD rework tool is from 0 to 999seconds.
Sleeping time interface of the soldering iron
Sleeping time interface of the re-soldering gun
Sleeping time interface of the SMD rework tool
To Next Page
Loading...