17
7. Once the four numbers are displayed the thermostat is paired and
you can either wait 30 seconds for the thermostat to default back
to the main display or tap
until you revert to the home screen.
5. Turn the dial until COUr is displayed, then tap
(Fig 7).
6. A two digit number will be displayed followed by two flashing - -
(Fig 8).
4. Turn the dial until CFG is displayed then tap (Fig 5) until t-r is
displayed then press
(Fig 6) which will revert back to the CFG
display.
Fig 5
Fig 7
Fig 6
Fig 8
To Next Page
Loading...
