16
Pairing the Thermostat and Receiver
1. Press and hold the on the receiver until green and red lights
flash alternatively (Fig 1).
2. Press and hold
on the Thermostat until the display shows tINE
(Fig 2).
3. Turn the dial on the thermostat until the display shows rF then
tap
(Fig 3) until the display shows COUt (Fig 4).
N.B. The receiver and thermostat comes pre-paired, but if for some
reason the pairing is lost, please follow the section below to pre-
pair your thermostat and receiver.
Fig 1
Fig 3
Fig 2
Fig 4
To Next Page
Loading...
