6
Holiday Switch
This is the black button located under the display (See Fig.1).
Press and hold the holiday switch for a minimum of 10
seconds until you hear an audible click, and this switches the
ESCTDEB off completely so there is no water heating and
no weekly “boost” heating. This feature should only be used
when the property is vacant for extended periods and there
is no requirement for water heating or for the weekly “boost”.
Pressing and holding the holiday switch again (for a minimum
of 10 seconds until you hear an audible click) will restart the
ESCTDEB, the display will show the cylinder temperature and
the weekly “boost” will immediately start and recur every 1-7
days depending on the user set position (see page 9) at the
same time.
Holiday Switch
Fig. 1
To Next Page
Loading...
