9
3. Operation modes
Operation Modes: AUTO, MAN, OFF.
Press
in homescreen to choose operation mode.
3.1 AUTO
• In Auto mode, choose All Day mode.
See section 3.2 for details.
• In Auto mode, choose Holiday mode.
See section 3.3 for details.
• Auto mode, if All Day mode or Holiday mode is not
selected, Auto mode will be used. In Auto mode,
the thermostat will work as per the user’s previous
programming setting. See section 5 for details.
Temporary manual override of set temperature. In Auto
mode, the user can turn the dial to adjust the set temperature
as below:
1. In homescreen, turn dial to temporarily adjust
temperature - Display will flash.
2. After approximately 3 seconds the display will alternate
between current room temperature and the time left until
the next programmed event. The temporary override will
end when the next programmed event starts.
3. Press
at anytime to cancel the temporary override.
To Next Page
Loading...
